Power supply – Philips ACT 7583 Uživatelská příručka

Stránka 9

Advertising
background image

POWER SUPPLY

9

Only use the AY 3170 mains adapter
(4.5V/300mA direct current, positive pole to the
centre pin). Any other product may damage the set.

1 Make sure the local voltage corresponds to the

adapter’s voltage.

2 Connect the mains adapter to the 4.5V DC

socket of the player and to the wall socket.

Notes: – Always disconnect the adapter when you are not using it.

– No acoustic feedback is available when using the adapter.

1 Make sure you insert the rechargeable ECO-PLUS NiMH batteries AY 3362.

2 Connect the mains adapter to the 4.5V DC socket of the player and to

the wall socket.

3 If necessary press

9 once or twice until the set is

switched off.

y

a is shown and CHArGE is displayed.

• The approximate charging time is 5 hours.

4 When the batteries are fully recharged, a is

shown and FULL is displayed.

Note: It is normal for the batteries to become warm

during recharging.

Recharging the AY 3362 ECO-PLUS NiMH batteries on board

Mains adapter

(supplied or optionally available)

English

Advertising