Acer S190HQL - Příručka (Stránka 23)

CS-1 4
Odstraňování problémů
Před odesláním Vašeho LCD monitoru na opravu, prosím projděte níže uvedený
seznam řešení problémů pro vlastní diagnostiku závad.
(Režim VGA)
Problems Current Status Remedy
No Picture
LED ON · Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF · Check the power switch.
· Check if AC power cord is properly
connected to the monitor.
LED displays · Check if video signal cable is properly
connected at the back of monitor.
· Check if the power of computer system is
ON.
Abnormal
Picture
Unstable
Picture · Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Display is
missing, center
shift, or too
small or too
large in display
size
· Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
· Using OSD, in case of missing full-screen
image, please select other resolution or
other vertical refresh timing.
· Wait for a few seconds after adjusting the
size of the image before changing or
disconnecting the signal cable or powering
OFF the monitor.
blinking blue
Abnormal No sound, or · Check the audio cable with the host PCis
Sound(Only sound level is connected.
Audio-Input too low
· Check if the volume setup of the hostPC is
model)
in minimum position and try toraise the
(Optional)
volume level.