2 energysaver, How to activate energysaver, Before first use – Electrolux ESF4510LOW Uživatelská příručka

Stránka 69: 1 the salt container, How to fill the salt container

Advertising
background image

detergent functions. They can also contain

other cleaning or rinsing agents.
This option deactivates the release of salt.

The salt indicator does not come on.
With the use of this option the programme

duration is prolonged to increase the

cleaning and drying results with the use of

multi-tablets.
Multitab is not a permanent option and

must be selected at every cycle.

7.2 EnergySaver

This option decreases the temperature of

the last rinsing phase and consequently

also the energy consumption

(approximately -25%).

Dishes can still be wet once the

programme is completed.
The duration of the programme will be

shorter.

How to activate EnergySaver

Press

Option until the indicator

comes on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes off.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener. It

seems that the appliance is not working.

The washing phase starts only after this

procedure is completed. The procedure

will be repeated periodically.

8.1 The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container

(Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening

of the salt container.

5. Turn the cap of the salt container

clockwise to close the salt container.

ENGLISH

69

Advertising