Electrolux EMM20007OX - Příručka (Stránka 26)

Problem Possible cause Remedy
The appliance does
not operate. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not operate. The appliance is not plug-
ged in. Plug in the appliance.
The appliance does
not operate. The fuse in the fuse box is
blown. Check the fuse. If the fuse
blows more than one time,
contact a qualified electri-
cian.
The appliance does
not operate. The door is not closed prop-
erly. Make sure that nothing
blocks the door.
The lamp does not
operate. The lamp is defective. The lamp has to be replace.
There is sparking in
the cavity. There are metal dishes or
dishes with metal trim. Remove the dish from the
appliance.
There is sparking in
the cavity. There are metal skewers or
aluminium foil that touches
the interior walls. Make sure that the skewers
and foil does not touch the
interior walls.
The turntable set
makes scratching or
grinding noise. There is an object or dirt be-
low the glass cooking tray. Clean the area below the
glass cooking tray.
The appliance stop
to operate without a
clear reason. There is a malfunction. If this situation repeats call
the customer service center.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
customer service centre. The necessary data for the customer
service center is on the rating plate on the
appliance.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
11. INSTALLATION
CAUTION!
Do not block the air vents. If you
do that, the appliance can over-
heat.
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
• The appliance is for built-in use only.
• The fitted cabinet must not have a back
wall behind the appliance.
• Put the appliance far away from steam,
hot air and water splashes.
• If you transport the appliance in cold
weather, do not activate it immediately
after the installation. Let is stand in the
room temperature and absorb the heat.
26 www.electrolux.com