Installation, 1 electrical installation – Electrolux EMS20010OS Uživatelská příručka
Stránka 27
Problem
Possible cause
Remedy
The appliance stop
to operate without a
clear reason.
There is a malfunction.
If this situation repeats call
the customer service center.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
customer service centre.
The necessary data for the customer
service center is on the rating plate on the
appliance.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
11. INSTALLATION
CAUTION!
Do not block the air vents. If you
do that, the appliance can over-
heat.
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
• The appliance is for a kitchen counter
top use only. It must be placed on a
stable and flat surface.
• Put the appliance far away from steam,
hot air and water splashes.
• If you transport the appliance in cold
weather, do not activate it immediately
after the installation. Let is stand in the
room temperature and absorb the heat.
11.1 Electrical installation
WARNING!
Only a qualified person must do
the electrical installation.
The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
"Safety Information".
This appliance is supplied with a main ca-
ble and main plug.
CAUTION!
Minimum installation height is 85
cm.
C
A
B
Minimal distances
Dimension
mm
A
300
B
150
C
100
ENGLISH
27