The count up timer, The minute minder, 9 stop+go – AEG HC451500EB Uživatelská příručka
Stránka 62: 10 lock, 11 the child safety device
When the timer countdown comes to
an end, the sound operates and
00
flashes. The cooking zone deactivates.
• To deactivate the sound: touch
The Count up timer
Use the Count up timer to monitor how
long the cooking zone operates.
• The selection of the cooking zone (if
more than 1 cooking zone oper-
ates) : touch
again and again until
the indicator of a necessary cooking
zone comes on.
When this function is activated,
comes on.
• To activate the Count up timer:
Touch
The symbol
goes out and
comes
on.
• To see how long the cooking zone
operates:set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the zone oper-
ates. The display shows the time of
the cooking zone that operates for
longer period of time.
• To deactivate the Count up timer:
set the cooking zone with
and
touch
or to deactivate the timer.
the symbol
goes out and
comes
on.
When the two Timer functions
operate at the same time, the
display shows the Count Up Tim-
er first.
The Minute minder.
You can use the timer as a minute mind-
er while the cooking zones do not oper-
ate. Touch
.
Touch
or of the timer to set the
time. When the time comes to an end,
the sound operates and
00
flashes.
• To stop the sound: touch
4.9 STOP+GO
The
function sets all cooking zones
that operate to the lowest heat setting -
Keep Warm (
).
When
operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol
comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
4.10 Lock
You can lock the control panel, but not
. It prevents an accidental change of
the heat setting.
First set the heat setting.
To start this function touch
. The sym-
bol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.11 The Child Safety Device
This function prevents an accidental op-
eration of the hob.
Starting the Child Safety Device
• Start the hob with .Do not set the
heat setting.
• Touch for 4 seconds. The symbol
comes on.
• Stop the hob with .
Switching off the Child Safety Device
• Start the hob with .Do not set the
heat setting. Touch
for 4 seconds.
The symbol
comes on.
• Stop the hob with .
Overriding the Child Safety Device for
one cooking session
• Start the hob with . The symbol
comes on.
• Touch for 4 seconds. Set the heat
setting in less than 10 seconds. You
can operate the hob.
62 www.aeg.com