Auxiliary function selection, Time display – Blomberg WNF 5421 AE Uživatelská příručka

Stránka 13

Advertising
background image

13

EN

Auxiliary function selection

Select the desired auxiliary functions before starting

the programme. Furthermore, you may also select

or cancel auxiliary functions that are suitable to the

running programme by pressing the Start / Pause

/ Cancel button when the machine is operating.

For this, the machine must be in a step before the

auxiliary function you are going to select or cancel.

Depending on the programme, press a, b, c or

d buttons to select the desired auxiliary function.

Symbol of the selected auxiliary function appears on

the display.

C

Some functions cannot be selected together.

If a second auxiliary function conflicting with

the first one is selected before starting the

machine, the function selected first will be

canceled and the second auxiliary function

selection will remain active. For example,

if you want to select Quick Wash after you

have selected the Prewash, Prewash will be

canceled and Quick Wash will remain active.

C

An auxiliary function that is not compatible

with the programme cannot be selected. (See

"Programme and consumption table")

C

Auxiliary Function buttons may vary according

to the model of the machine.

• Prewash

A Prewash is only worthwhile for heavily soiled

laundry. Not using the Prewash will save energy,

water, detergent and time.

F1 appears on the display when you select this

function (a).

• Quick Wash

This function can be used in Cottons and Synthetics

programmes. It decreases the washing times and

also the number of rinsing steps for lightly soiled

laundry.

F2 appears on the display when you select this

function (b).

C

When you select this function, load your

machine with half of the maximum laundry

specified in the programme table.

• Rinse Plus

This function enables the machine to make another

rinsing in addition to the one already made after the

main wash. Thus, the risk for sensitive skins (babies,

allergic skins, etc.) to be effected by the minimal

detergent remnants on the laundry can be reduced.

F3 appears on the display when you select this

function (c).

• Anti-Creasing

This function creases the clothes lesser when they

are being washed. Drum movement is reduced and

spinning speed is limited to prevent creasing. In

addition, washing is done with a higher water level.

F4 appears on the display when you select this

function (d).

• Rinse Hold

If you are not going to unload your clothes

immediately after the programme completes, you

may use rinse hold function to keep your laundry

in the final rinsing water in order to prevent them

from getting wrinkled when there is no water in the

machine. Press Start / Pause / Cancel button after

this process if you want to drain the water without

spinning your laundry. Programme will resume and

complete after draining the water.

If you want to spin the laundry held in water, adjust

the Spin Speed and press Start / Pause / Cancel

button.

The programme resumes. Water is drained, laundry

is spun and the programme is completed.

• Soaking

The Soaking auxiliary function ensures better

removal of stains ingrained into the clothes by

holding them in the detergent water prior to startup

of the programme.

Time display

Remaining time to complete the programme

appears on the display while the programme is

running. Tim is displayed as “

01:30

” in hours and

minutes format.

C

Programme time may differ from the values

in the "Programme and consumption

table" depending on the water pressure,

water hardness and temperature, ambient

temperature, amount and the type of laundry,

auxiliary functions selected and the changes at

the mains voltage.

Delayed start

With the Delayed Start function the startup of

the programme may be delayed up to 24 hours.

Delayed start time can be increased by increments

of 30 minutes.

C

Do not use liquid detergents when you set

Delayed Start! There is the risk of staining of the

clothes.

Open the loading door, place the laundry and put

detergent, etc. Select the washing programme,

temperature, spin speed and, if required, the

auxiliary functions. Set the desired delayed start

time by pressing the Delayed Start + or - buttons.

Delayed Start symbol flashes. Press Start / Pause

/ Cancel button. Delayed start countdown starts.

Delayed Start symbol illuminates steadily. Start

symbol appears. “:” sign in the middle of the

delayed start time on the display starts flashing.

C

Additional laundry may be loaded during

the delayed start period. At the end of the

countdown, Delayed Start symbol disappears,

washing cycle starts and the time of the

selected programme appears on the display.

Changing the delayed start period

If you want to change the time during countdown:

Press Start / Pause / Cancel button. “:” sign in the

middle of the delayed start time on the display stops

flashing. Pause symbol appears. Delayed Start

symbol flashes. Start symbol disappears. Set the

desired delayed start time by pressing the Delayed

Start + or - buttons. Press Start / Pause / Cancel

button. Delayed Start symbol illuminates steadily.

Pause symbol disappears. Start symbol appears.

“:” sign in the middle of the delayed start time on the

Advertising
Tato příručka se vztahuje na následující produkty: