Práce na počítači, Before working inside your computer, Kapitola 1: práce na počítači – Dell Precision M6600 (Mid 2011) Uživatelská příručka

Stránka 9

Advertising
background image

Práce na počítači

1

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential

damage and to help to ensure your personal safety. Unless otherwise noted, each

procedure included in this document assumes that the following conditions exist:

• You have performed the steps in Working on Your Computer.
• You have read the safety information that shipped with your computer.
• A component can be replaced or--if purchased separately--installed by

performing the removal procedure in reverse order.

VAROVÁNÍ: Before working inside your computer, read the safety information that
shipped
with your computer. For additional safety best practices information, see
the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

VÝSTRAHA: Many repairs may only be done by a certified service technician. You
should
only perform troubleshooting and simple repairs as authorized in your
product
documentation, or as directed by the online or telephone service and
support
team. Damage due to servicing that is not authorized by Dell is not covered
by
your warranty. Read and follow the safety instructions that came with the

product.

VÝSTRAHA: To avoid electrostatic discharge, ground yourself by using a wrist
grounding
strap or by periodically touching an unpainted metal surface, such as a
connector
on the back of the computer.

VÝSTRAHA: Handle components and cards with care. Do not touch the components
or
contacts on a card. Hold a card by its edges or by its metal mounting bracket.
Hold
a component such as a processor by its edges, not by its pins.

VÝSTRAHA: When you disconnect a cable, pull on its connector or on its pull-tab,
not
on the cable itself. Some cables have connectors with locking tabs; if you are
disconnecting
this type of cable, press in on the locking tabs before you disconnect
the
cable. As you pull connectors apart, keep them evenly aligned to avoid bending
any
connector pins. Also, before you connect a cable, ensure that both connectors
are
correctly oriented and aligned.

POZNÁMKA: The color of your computer and certain components may appear
differently than shown in this document.

9

Advertising