Canon PIXMA MP560 - Příručka (Stránka 759)

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the Printer
Setting the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
The screens may differ depending on the printer you are using.
If you need more information about the Bluetooth settings, see
Setting Bluetooth Printing .
1. Make sure that the Bluetooth unit is attached and the printer is turned on.
For information about how to attach the Bluetooth unit, see Attaching to and Removing from the
Printer .
2. Display the Bluetooth settings screen on the LCD.
For information about how to display the Bluetooth settings screen, refer to Changing the Machine
Settings on the LCD .
Note
If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be
attached correctly. Remove the Bluetooth unit from the printer and attach it once again.
For details, see
Attaching to and Removing from the Printer .
If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In this
case, contact the service center.
3. Select Device name.
The Device name screen is displayed.
4. Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the
device name.
Note
If multiple printer units with the same model name are connected to the system, assigning a
Stránka 759 z 985 stránek Setting the Printer