Philco PF 2252 - Příručka (Stránka 11)

EN - 9
11/2011 Copyright © 2011, Fast ČR, a. s.
Procedure for switching the door opening direction
The direction to which the door opens can be changed from the right (as supplied) to the left, if this is necessary
at the installation location.
WARNING!
The appliance must be disconnected from the power grid when changing the door opening direction.
Pull the power plug out of the power socket before installation.
Tilt the appliance backwards and lean it safely in position. Unscrew the hinge bolts and take out the pin of the
holder. Open the door a little and slide it out by pulling it downwards.
Unscrew the top pin and screw it in on the opposite side. Attach the door into the top pin and close it.
Using bolts to screw in the pin of the holder on the other side of the appliance.