Philco PSF 341 - Příručka (Stránka 12)

EN - 10
07/2011 Copyright © 2011, Fast ČR, a. s.
PART 4: SETTING THE TEMPERATURE
Set the temperature in the freezer using the temperature control knob. The thermostat control module
is connected to the compressor. Turn the temperature control knob upwards or downwards and set the
temperature inside the freezer. Temperature set to the lowest value is the warmest, and the temperature set to
the highest value is the coldest.
Position “ Min” – cold
Position “Normal” – colder. The standard setting is in this position.
Position “ Max” – coldest
Position “ Super” – for fast freezing of very warm meals
The temperature needs to be set based on:
 Temperature in the room where the appliance is located;
 Amount of food stored;
 Number of times the appliance is opened.
We recommend the middle settings. Soon you will fi nd out the optimal setting for your requirements.
A correct temperature setting is important for storing food. Food spoil very quickly because of micro-
organisms, which is possible to prevent or delay by the use of a correct storage temperature. Temperature
aff ects the growth rate of the micro-organisms. These process are slowed down by a declining temperature.
For this reason we recommend the middle settings of the thermostat.
PART 4: SETTING THE TEMPERATURE