Philco PEW 6711 - Příručka (Stránka 21)

EN - 19
04/2012 Copyright © 2012, Fast ČR, a. s.
If you wish to use the appliance without clearing the "C" symbol (depending on the model), press the fan
button to start extraction for 1 second, then the "C" symbol (depending on the model) will appear again and
the motor will continue running.
NOTE:
The "C" symbol (depending on the model) appears on the display after approximately 60 hours
of operation.
Models with an LCD display – 5 speeds
The aluminium fi lters need to be cleaned when appears on the display.
Clean the fi lters according to the above mentioned instructions and after reinstalling them press and hold
down the fan button for 3 seconds until the symbol (depending on the model) disappears from the
display.
NOTE:
The symbol (depending on the model) appears on the display after approximately 60 hours
of operation.
WARNING!
For cleaning do not use petrol, benzene, thinners or any other solvents, coarse cleaning agents,
steel wool or any sponges with steel wool.
WARNING!
You may put the aluminium fi lters in a dishwasher. The colour of the aluminium fi lters may change
after several washes. This is a normal event.