Parkside BMR 1400 - Příručka (Stránka 9)

GB
9
Do not let the cable touch any parts of your
body.
Only use the extension cable approved for
use in the working area.
The unit must only be started and stopped
when it is inside a mixing vessel. Ensure
that the mixing vessel is placed on a solid,
secure base.
Never reach into the mixing vessel with your
hands or any other object during the mixing
process.
We recommend that you always wear
industrial safety gloves and safety googles
when working with the mixer.
Wearing close-fitting clothes is mandatory.
Always allow for reaction torque
The appliance is to be fused with a residual
current protective device (RCD) with rated
residual current of no more than 10mA, to
avoid danger. Test this at regular intervals.
Save this instructions.
3. Layout (Fig. 1/2/4)
1. On/Off switch
2. Locking knob
3. Speed control
4. Open-ended wrench for changing the
mixing tool
5. Mixer holder
6. Mixer
4. Items supplied
Take all the parts out of the packaging.
Check that nothing is missing.
Paint and Mortar Mixer BMR 1400
Mixing tool
2 open-ended wrench for changing the
mixing tool
5. Intended use
The machine has been designed to mix liquid
and powderery building materials such as paint,
mortar, adhesive, plaster and similar
substances. The relevant mixing action (which
depends on the consistancy of the materials
and the quantity that has to be mixed) must be
set up for the appropriate mixing tool.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
6. Technical data
Mains voltage: 230 V ~ 50 Hz
Power input: 1400 W
Idling speed: 0-700 min -1
Mixing tool mount: M14
Protection class: II /
Ɓ
Weight: 3.6 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level 84.5 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 95.5 dB(A)
K
WA
uncertainty 3 dB
Anleitung_4258583:_ 04.05.2010 15:41 Uhr Seite 9