The device components, Putting the device into use, Connecting the transmitter – Silvercrest KH 2130 Uživatelská příručka

Stránka 8

Advertising
background image

- 6 -

The device components

Fig. A: The transmitter:
q

Transmitter

w

LED status indicator

e

Switch ROOM 1

r

Switch ROOM 2

t

Infrared connection socket (IR)

y

Output for a TV

u

AV input 2

i

AV input 1

o

Connection socket

a

Transmitter's on/off switch

s

Transmitter channel toggle switch

(on the underside of the device)

Fig. B: The receiver:
d

Receiver

f

Infrared receiver

g

LED operating indicator

h

Audio/Video CINCH outputs

j

Connection socket for the supply

voltage

k

Receiver's on/off switch

l

Reception channel switch (bottom

of device)

1(

Wall plug transformer (2 pieces)

2)

CINCH—3,5mm jacks cables (2 pieces)

2!

SCART—CINCH adapter "IN"

2@

SCART—CINCH adapter "OUT"

2#

Infrared cable with 3 transmit diodes

2$

AUDIO adapter 3.5 mm mini-stereo

to CINCH female

2%

CINCH—CINCH cable

Putting the device into use

First take all device components from the

packaging and remove all packing foil

and tape.

Important notice:

Even when the system (transmitter +

receiver) is switched off, the manufac-

turer still recommends disconnecting

the wall plug transformer from the

mains power or using a power strip

with a shut-off switch. Only in this way

is complete switch off assured thus

contributing to economical consumer

attitude.

Connecting the transmitter

Note:

You can connect two signal sources.

The signal to be transmitted can be

selected via a switch on the front

panel of the transmitter. Thereby the

radio transmission set can transmit the

image and sound signals of every de-

vice that emits a sound and/or video

signal via a suitable connection:

• DVD Player / CD Player

• VCR

• Television

• SAT receiver/set top box

• Video camera

• Computer video card, etc.

Connecting signal sources to the
transmitter:

On devices with cinch outputs for the

audio and video signals you connect

these via one of the supplied CINCH—

3,5mm jack cables 2) to the socket

"AV IN 1" i on the rear panel of the

transmitter q.

IB_KH2130_DT35269_LB4BC.indb 6

IB_KH2130_DT35269_LB4BC.indb 6

04.09.2009 13:10:07 Uhr

04.09.2009 13:10:07 Uhr

Advertising