Troubleshooting, Technical data, System requirements – Silvercrest STL 1.5 A1 Uživatelská příručka
Stránka 2: Warranty information
Take care when using headphones.
Listening at full volume for prolonged
periods of time can damage your
hearing.
Troubleshooting
Fault
Remedy
The device cannot
be switched on.
Hold button 3 down for a few
seconds.
Check the battery status. If
necessary charge the battery.
The device cannot
be charged.
Check the USB connection.
Use a different USB socket on your
PC or notebook.
No sound
Check the set volume on the device
or your external audio source.
Increase the volume with button 4
or with the volume control of your
external audio source.
Remove the microSD card if you
are using the loudspeaker for
playback from an external audio
source.
Audio files on the
microSD card are
not played.
Check that the microSD card is
correctly inserted and engaged.
Only use MP3 files
Technical data
Model
Multi-function speaker
STL 1.5 A1
Dimensions (without eyelet)
(Height x
)
40 x 52mm (closed)
54 x 52mm (open)
Weight
55g
Supported audio format
MP3
Connections
1 x Stereo audio in, 3.5mm jack
1 x Stereo audio out, 3.5mm
jack
1 x microSD card reader
(16 GB max.)
1 x Mini-USB
Power supply
5V via USB
Battery
Lithium-ion battery, 3.7V,
300mAh (permanently installed)
Loudspeaker impedance
4 Ohm
Audio output power
1.5W RMS *
Max. output voltage
on headphone output
Approx. 55mV
* The stated audio output power is only achieved if the device
is supplied with power from the USB cable included.
System requirements
A PC with the following specifications:
Operating system: Windows
®
7 / Vista / XP
USB 1.1 connection or higher
Cleaning
Remove all connected devices before cleaning
the speaker. The multi-function speaker and a
connected device can otherwise become damaged.
If soiled, clean the device with a dry cloth, and moisten
the cloth slightly to remove stubborn dirt. Do not use
any solvents, corrosive or gaseous cleaning agents.
Ensure that no moisture penetrates the housing.
Disposal of old devices
The product bears the symbol of a crossed-out
wheelie bin. It is therefore subject to the
European Directive 2002/96/EC.
All old electrical and electronic devices must be
separated from normal household waste and disposed
of at designated state facilities. For further information
contact your local authorities, waste disposal office or
the shop where you bought the device.
The integrated battery cannot be removed for disposal.
Legal stipulations
The multi-function speaker meets all relevant
standards in relation to CE conformity. Compliance
with these standards is no longer guaranteed in the
event of unauthorised modifications to the multi-
function speaker.
If you are not using the device within the Federal
Republic of Germany, you must observe the
regulations and laws in the country of use.
Manufacturer TARGA GmbH, Postfach 2244, D-
59482 Soest
Notes on conformity
The multi-function speaker conforms with the basic
requirements and other required provisions of the EMC
Directive 2004/108/EC.
Warranty information