Samsung NP-R528CE - Příručka (Stránka 22)

1-22
Connect and Disconnect
the AC adapter
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
Do not unplug the power cord out by pulling
the cable only.
Power Cord Requirements
The power cord set (wall plug, cable and AC
adapter plug) you received with your computer
meets the requirements for use in the country
where you purchased your equipment.
Power cord sets for use in other countries must
meet the requirements of the country where
you use the computer. For more information
on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable
to all countries:
 All power cord sets must be approved by an
acceptable accredited agency responsible
for evaluation in the country where the
power cord set will be used.
 The power cord set must have a minimum
current capacity of 7 A and a nominal
voltage rating of 125 or 250 volts AC, as
required by each country’s power system.
(USA ONLY)
 The appliance coupler must meet the
mechanical configuration of an EN 60
320/IEC 320 Standard Sheet C7(or C5)
connector, for mating with appliance inlet on
the computer.