Panasonic KXTG9120FX - Příručka (Stránka 30)

m Handset Settings
30
Display setup
Selecting wallpaper
You can select the “wallpaper” shown on the
display in standby mode.
1
J (centre of joystick) i m i L
2 “Display Setup” i L
3 “Wallpaper” i L
4 Push the joystick up or down to select
the desired picture.
L
You can switch between the picture list
and the picture view by pressing b
or c.
5
L i {ih}
Note:
L
If you select “No Picture”, the display
colour will be changed to the colour you
selected for display colour (page 30).
L
The preset wallpaper patterns in this
product are used with permission of ©
Digital Vision.
Selecting a display colour
1
J (centre of joystick) i m i L
2 “Display Setup” i L
3 “Display Colour” i L
4 Select the desired colour. i L i
{ih}
Changing the display contrast
This feature is available for wallpaper and
display icons.
1
J (centre of joystick) i m i L
2 “Display Setup” i L
3 “Contrast” i L
4 Push the joystick up or down to select
the desired contrast. i L i
{ih}
Baby monitor (additional
handset required)
Using the baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house. The monitored handset (placed
in a baby’s room, for example) will
automatically call the monitoring handset
when it detects sound.
Perform the following procedure with the
handset to be monitored (for example, the
handset placed in the baby’s room).
1
J (centre of joystick) i m i L
2 “Baby Monitor” i L
3 “On/Off” i L
4 “On” i L
5 Select the desired handset number to
monitor with. i L
L
“Baby Monitor” will be displayed.
Note:
L
The monitoring handset will answer calls
automatically when the auto intercom
feature is set to “On” (page 32).
L
The monitored handset cannot be used
while baby monitor is set to “On”. To
cancel monitoring;
J
i “On/Off” i L i “Off”
i L i {ih}
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity
to adjust the sound level needed to trigger
the baby monitor feature.
L
This feature cannot be set during a
monitoring call.
1 Press J on the handset being
monitored.
2 “Sensitivity” i L
TG9120FX(e).book Page 30 Tuesday, August 29, 2006 9:44 AM