Nstallation – LG F7092QD Uživatelská příručka

Stránka 69

Pozor! Text v tomto dokumentu byl rozpoznán automaticky. Chcete li prohlédnout původní dokument - stiskněte tlačítko "Původní režim".

Advertising
background image

nstallation

Install or store where It will not be exposed to temperatures below freezing or exposed to the
weather.

Properly ground washer to conform with ail governing codes and ordinances.

The base opening must not be obstructed by carpeting when the washing machine is instalied on
a carpeted fioor.
In countries where there are areas which may be subject to Infestation by cockroaches or other

vermin, pay particular attention to keeping the appliance and its surroundings in clean condition
at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the

appliance guarantee.

■ Transit bolts

The appliance is fitted with transit bolts to prevent Internal damage during transport.

• Packing and all transit bolts

must be removed before using

the washer.

ts-When unpacking the base, be

sure to remove the additional

packing support in the middle

of the base packing.

■ Removing transit bolts

1. To prevent internal damage during

transport, the special 4 bolts are

locked. Before operating the washer,
remove

the bolts along with the rubber bungs.

• If they are not removed, it may cause

heavy vibration, noise and malfunction.

3. Take out the 4 bolts along with the

rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future use.

• Whenever the appliance is transported,

the transit bolts must be refitted.

2. Unscrew the 4 bolts with

the spanner supplied.

4. Close the holes with the caps supplied.

Advertising