LG F84B8TDA - Příručka (Stránka 69)

nstallation
Install or store where It will not be exposed to temperatures below freezing or exposed to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on
a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean condition
at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the
appliance guarantee.
■ Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts
must be removed before using
the washer.
o- When unpacking the base, be
sure to remove the additional
packing support in the middle
of the base packing.
■ Removing transit bolts
I. To prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove the bolts along with the
rubber bungs.
■ If they are not removed, it may cause
heavy vibration, noise and malfunction.
3
.
Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future use.
■ Whenever the appliance Is transported,
the transit bolts must be refitted.
2
.
Unscrew the 4 bolts with
the spanner supplied.
4
.
Close the holes with the caps supplied.