Philco PT 2272 - Příručka (Stránka 11)

EN - 9
04/2011 Copyright © 2011, Fast ČR, a. s.
PART 4: SETTING THE TEMPERATURE
Set the temperature in the refrigerator using the thermostat. The thermostat control module is connected
to the compressor. Turn the thermostat upwards or downwards and set the temperature inside the refrigerator.
Temperature set to the value "1" is the warmest, and the temperature set to "5" is the coldest.
The value "0" means that the refrigerator is off .
Set the position from 1 to 5 for normal use. If you are not sure about the temperature, set it to 3.
The temperature needs to be set based on:
• Temperature in the room where the appliance is located;
• Amount of food stored;
• Number of times the appliance is opened.
We recommend the middle settings. Soon you will fi nd out the optimal setting for your requirements.
A correct temperature setting is important for storing food. Food spoil very quickly because of micro-
organisms, which is possible to prevent or delay by the use of a correct storage temperature. Temperature
aff ects the growth rate of the micro-organisms. These process are slowed down by a declining temperature.
For this reason we recommend the middle settings of the temperature controller.
PART 5: INSIDE LIGHTING
All appliances equipped with a light have a switch installed. When the refrigerator is turned on using the
thermostat, the light will automatically come on when the door is opened and automatically turn off when
the door is shut.
Changing a light bulb
1. Disconnect the appliance from the power source.
2. Press the hooks on the sides of the top part of the cover and take out the light bulb cover.
3. Replace the current light bulb with a new one with power not exceeding 15 W.
4. Attach the light bulb cover and after 5 minutes connect the appliance to the power source.