Part 8: before you call the service centre, Part 9: technical specifications – Philco PMD 2010 S Uživatelská příručka
Stránka 16
EN - 14
07/2011
Copyright © 2011, Fast ČR, a. s.
PART 8: BEFORE YOU CALL THE SERVICE CENTRE
If the oven is not working properly:
1. Check that the microwave oven is correctly connected to the power socket. If not, take the power plug out
of the power socket, wait 10 seconds and then reinsert it.
2. Check whether a fuse has burned or a circuit breaker has been disconnected. If everything appears to be
in order, try a diff erent appliance in the same power socket.
3. Check that you have set the proper values on the control panel.
4. Check that the door is properly closed and that the door safety system is working properly.
Otherwise microwaves will not be produced in the oven.
WARNING!
IF THE ABOVE MENTIONED STEPS DO NOT HELP, CONTACT AN AUTHORISED SERVICE CENTRE.
DO NOT ATTEMPT TO MODIFY OR REPAIR THE MICROWAVE OVEN YOURSELF.
PART 9: TECHNICAL SPECIFICATIONS
Nominal voltage range
230 V
Nominal frequency
50 Hz
Rated power input
1200 W (Microwave)
900W (Grill)
Microwave power output
700 W
Operating frequency
2 450 MHz
Noise level
58 dB (A)
Diameter of the turning tray
245 mm
Volume
20 l
External dimensions (h x w x d) cm
262 x 452 x 345 mm
NOTE:
All the here mentioned data is subject to change.