Philco PMD 2211 X - Příručka (Stránka 8)

EN - 6
09/2011 Copyright © 2011, Fast ČR, a. s.
PART 3: INSTALLATION
1. Make sure that you have removed all packaging materials and advertising labels from inside the appliance.
2. WARNING: Check that the microwave oven is not damaged and that the door and the locks fi t well, that
the seal is not damaged, that the hinges and locks are not destroyed or loosened and that the inside area
is in order. If you discover any damage, please contact an authorised service centre.
3. This microwave oven must be placed on an even, stable surface, that can bear its weight even with the
food inserted.
4. Do not install the oven in the vicinity of heat sources, moisture or high humidity, or near fl ammable
materials.
5. For proper operation of the microwave oven it is necessary to provide suffi cient air ventilation. Allow free
space of 20 cm above the top surface of the oven, 10 cm from behind and 5 cm on the sides. Do not cover
or block the openings in the appliance. Do not remove the feet of the microwave oven.
6. Do not use the microwave oven without the glass turning plate, drive assembly and the rotating ring
installed.
7. Make sure that the power cord is not damaged and is not lead under the oven or over a hot or sharp
surface.
8. The power socket must be freely accessible so that you can disconnect the microwave oven at any time
if necessary.
9. Do not use the microwave oven outdoors.
10. The appliance is designed to be used in free space, it is not designed to be built-in.