Philco PHD 64 F4S - Příručka (Stránka 10)

EN - 8
04/2014 Copyright © 2014, Fast ČR, a. s.
Timer functions
The timer makes it possible to set the time after which the hotplate will automatically turn off in the range
from 1 to 99 minutes.
Setting and adjusting the cooking time
Set the power level of the cooktop between 1 – 9. To set the timer, press the
button. "00" will start fl ashing
on the timer display. Slide your fi nger along the power selection zone and set the timer duration. The timer
duration is confi rmed and the countdown is started and the hotplate heats for the set time until "00" appears
on the display.
Stopping the cooking time
Press the
button. "00" will start fl ashing on the timer display. Slide your fi nger along the power selection
zone and shorten the timer until "00" appears on the display.
If several timers are activated, repeat the above described process for each of the timers.
Minute timer
The minute timer is an independent function. It stops as soon as the hotplate starts. If the minute timer
is turned on, the cooktop is turned off . The minute timer will run until the time elapses.
Turn on the cooktop using button 0/I. "0" will appear on the display. To set the timer, press the button.
"00" will start fl ashing on the timer display. Slide your fi nger along the power selection zone and set the timer
duration. The timer duration is confi rmed and the countdown is started and the hotplate heats for the set time
until "00" appears on the display.
Automatic shut off after the cooking time has elapsed
"00" will start fl ashing on the display and a sound will be made as soon as the timer duration is complete.
To cancel the sound signal, press the
button.
Automatic cooking
All hotplates are equipped with the automatic cooking function. The selected hotplate will start cooking at full
power for a certain time and then automatically reduce the power to a preset power level.
To activate the function, slide your fi nger along the power selection zone. For example, if you wish to set 7, slide
your fi nger until "7" appears on the display and hold your fi nger here for approximately 3 seconds. "7" and "A"
will start fl ashing on the display.
To turn off the automatic cooking function, slide your fi nger along the power selection zone until 0 appears
on the display.
Stop & Go function
This function makes it possible to temporarily turn off a hotplate and to turn it on again to the initial setting.
To turn on the function, press the II button for approximately 2 seconds. The display will show II. To turn off
the function, press the II button for approximately 2 seconds and use the power selection zone. The previous
setting will appear.