Philco PHD 64 F4S - Příručka (Stránka 15)

EN - 13
04/2014 Copyright © 2014, Fast ČR, a. s.
PART 5: INSTALLING THE APPLIANCE
Safety precautions
 The appliance MUST be installed in the correct manner from the technical point of view and in accordance
with this installation manual and according to valid local legal codes. The person performing the
installation is responsible for any damages caused by an inadequate installation.
 The appliance must only be connected by an authorised technician, who must follow the provisions of the
power company in the installation location.
 With respect to protection, the appliance is a type I and may only be put into operation if the connection
is properly grounded.
 Serious injuries may result if this appliance is not correctly connected to a grounding clamp or is put into
operation without professional installation. The manufacturer is not responsible for incorrect use and
possible damages caused by an incorrect electrical installation.
 With respect to electrical protection, it is necessary to install type B or C fuses.
 If the appliance is not equipped with a plug, then it is necessary to install suitable means for disconnecting
it from the electricity grid in accordance with valid local installation codes.
 The power cord must be guided in such a way that it does not touch the hot parts of the cooktop or a stove.
 Induction cooktops can only be installed above ovens with ventilation from the same manufacturer.
 There must be no refrigerator, dishwasher, stove without ventilation or washing machine located
under the cooktop.
 If the cooktop is installed above a drawer, metal items located inside the drawer space could become
heated to a high temperature by the air circulation coming from the cooktop ventilation, so for this reason
we recommend the use of a partition panel.
 For a suitable partition panel you can use a wooden board or purchase adequate accessories.
 Any tampering with the appliance, including the replacement of the power cord may only be performed
by an authorised service centre.
ATTENTION:
Neither the manufacturer, importer nor the distributor take any responsibility for damage resulting from
incorrect installation or connection.
Selecting the installation location
 Do not place any other appliance in the area up to 65 cm above the appliance.
 A range hood must be installed according to the range hood manufacturer's instructions.
 The wall in the rear part of the installed cooktop must be made from an infl ammable material.
 The length of the power cord must not exceed 2 metres.