Kompernass KH 3236 - Příručka (Stránka 8)

- 4 -
Description of the appliance
1 Measurement point
2 Display
3 Material switch (STUD/AC WIRE/METAL)
4 Button – MODE
5 Button – Holding pin
6 Button – READ
7 Button M (Memory)
8 Spirit level
9 Laser
0 Ultrasound sender/receiver
q Function switch (Laser/Detector/Distance)
w Button – RM (Read Memory)
e Button – Holding pin
r Button +/=
t Battery compartment
z Button – PUSH
Items supplied
• 5 in 1 Multi-Measurement Detector with Laser
• 9 V block battery
• Operating instructions
Unpacking
Take the Manifold Measurer from its packaging. Remove all transport restraints
and packaging materials. Remove the protective foil from the display
2 .
Inserting the battery
1. Open the battery compartment t on the rear side of the Multi-Measurement
Detector.
2. Place the 9 V block battery onto the contacts. Pay heed to the correct polarity.
3. Lay the tape for removal of the battery underneath the 9 V block battery and
press it into the battery compartment
t .
Important!
Ensure that the wires are not trapped in any way.
This would lead to irreparable damage to the appliance.
IB_KH3236_BN3376_GB_LB4u5 29.02.2008 18:06 Uhr Seite 4