Installation, 1 installation, 2 electrical connection – Electrolux EHH3920BOK Uživatelská příručka
Stránka 32
MOD.
PROD.NO.
SER.NO
DATA
MOD.
PROD.NO.
SER.NO
DATA
MODEL
MODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20
0049
1
2
3
1
Stick it on Guarantee Card and send
this part
2
Stick it on Guarantee Card and keep
this part
3
Stick it on instruction booklet
8. INSTALLATION
WARNING!
Refer to the Safety chapters.
8.1 Installation
WARNING!
Read and follow the instructions
carefully. There is a risk of injury or
damage to the appliance.
• Make sure that there is no damage to
the appliance from the transportation.
Do not connect a damaged appliance.
Speak to the supplier if necessary.
• Install built-in appliances only after you
assemble the appliance into correct
built-in units and work surfaces. Make
sure that built-in units and surfaces
obey the standards.
• Obey all orders and standards in force
in the country where you use the appli-
ance (safety standards, recycling stand-
ards, electrical safety standards etc.)
WARNING!
Risk of injury from electrical cur-
rent.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• If the fixing bracket is near to the termi-
nal block, do not let the connection ca-
ble come in contact with the edge of
the bracket.
8.2 Electrical connection
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug (if applicable).
• The appliance must not be connected
with an extension cable, an adapter or
a multiple socket. There is a risk of fire.
• Do not let the power cable to heat up
to a temperature of more than 90° C.
The cable should be guided by means
of clamps fixed to the side of the cabi-
net, in order to avoid any contact with
the equipment beneath the cooktop.
• Make sure that there is access to the
mains plug after the installation.
32 www.electrolux.com