Maintenance, Cleaning your washer, Cold conditions the washing drum – LG F84A8TD Uživatelská příručka

Stránka 111: Exterior, Interior

Advertising
background image

31

• Proper care of your washer can extend its life.

• The outside of the machine can be cleaned with warm water and a neutral non abrasive household

detergent.

• Immediately wipe off any spills. Wipe with damp cloth.

• Try not to hit surface with sharp objects.

• Do not use methylated spirits, diluents or similar products.

If the washer is stored in an area where freezing may occur or moved in freezing temperatures, follow these
instructions to prevent damage to the washer:
• Turn off water supply tap.
• Disconnect hoses from water supply and drain water from hoses.
• Plug electrical cord into a properly grounded electrical outlet.
• Add 1gallon (3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum. Close the door.
• Set spin cycle and let washer spin for 1minute to drain out all water. Not all of the RV antifreeze will be expelled.
• Unplug electrical power cord, dry the drum interior, and close the door.
• Remove dispenser drawer, drain and dry excess water from the compartments.
• Store washer in an upright position.
• To remove antifreeze from washer after storage, run empty washer through a complete cycle using

detergent. Do not add wash load.

Cleaning your washer

Cold conditions

The washing drum

• If you live in a hard water area, limescale may build up continuously in places where it cannot be seen

and thus not easily removed. Over time the build up of scale clogs appliances, and if it is not kept in
check these may have to be replaced.

• Although the washing drum is made of Stainless steel, specks of rust can be caused by small metal

articles (paper clips, safety pins) which have been left in the drum.

• The washing drum should be cleaned from time to time.

• If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machine use.

• Descaler may contain chemicals that may damage part of your washing machine.

• Remove any spots with a stainless steel cleaning agent.

• Never use steel wool.

‹¤Exterior

• Dry around the washer door opening, flexible gasket and door glass.

• Run washer through a complete cycle using hot water.

• Repeat process if necessary.

‹¤Interior

Maintenance

NOTE

To remove hard water deposits, use only cleaners labelled washer safe.

Advertising