LG GR-P207SLQA - Příručka (Stránka 13)

Operation
13
Throw away the ice (about 20 pieces) and water (about 7 glasses) first made after
refrigerator installation.
The first ice and water may include particles or odor from the feed water pipe or feed
water box. This is necessary in case that the refrigerator has not been used for a long
time.
Keep children away from the dispenser.
Children may push switch incorrectly bad or damage
lamps.
Be careful that food is not block the ice passage.
If foods are placed at the entrance of ice passage, ice
may not be dispensed. The ice passage may also be
covered with ice powder if splinter ice is used only. This
time, remove the ice powder accumulated.
Never store beverage cans or other foods in ice
storage bin for the purpose of rapid cooling.
Such actions may damage the automatic ice maker.
Never use thin crystal glass or crockery to collect ice.
Such glasses or containers may be broken.
Put ice first into a glass before filling water or other beverages.
Water may be splashed if ice is added to existing liquid in a glass.
Never touch a hand or other tools on ice outlet.
Touch may cause a part breakage or hand injury.
Never remove the ice maker cover.
Sometimes level the surface so that the ice storage bin is fully filled with ice.
Ice is piled up just near the ice maker. So, such status may be considered, by the ice
maker, that the ice storage bin is fully filled and ice making operation may stop.
If discolored ice is dispensed, immediately contact service center, stopping use.
Never use too narrow or deep glass.
Ice may be jammed in ice passage and, thus, the refrigerator may be failed.
Keep the glass at a proper distance from ice outlet.
A glass too close to the outlet may hinder ice from coming out. Cautions
As demonstrated below, it displays the months left in units of 30 days until the filter
replacement is required, starting from when the refrigerator power usage is
authorized.
After 6 months, the following sentence and will appear on the filter condition
part of the LED. "Press for 3 seconds after replacing filter"
After 6 months have passed, and if the filter has been replaced or you want to reset
the filter condition display, press the filter replacement button for more than 3
seconds and it will reset to the initial Power On state.
6 Filter condition
(filter replacement
cycle) display
function
(Applicable to
some models only)
Filter Status
Display
Classification
Pass of
6 months
FILTER STATUS
FILTER RESET
HOLD 3 SEC.
6
5
4
3
2
1
Pass of
5 months
FILTER STATUS
6
5
4
3
2
1
Pass of
4 months
FILTER STATUS
6
5
4
3
2
1
Pass of
3 months
FILTER STATUS
6
5
4
3
2
1
Pass of
2 months
FILTER STATUS
6
5
4
3
2
1
Pass of
a month
FILTER STATUS
6
5
4
3
2
1
In initial
Power On
FILTER STATUS
6
5
4
3
2
1
FILTER STATUS
FILTER RESET
HOLD 3 SEC.
<Type - 1>
<Type - 2>
FILTER ST TER STATUS
After 6 months have passed the filter change icon will appear
on the display.