Transmission / receiving protocol, Transmission, Acknowledgement – HP 55 inch LED monitor HP LD5535 Digital Signage Uživatelská příručka

Stránka 89: Power (command: k a), Transmission acknowledgement

Advertising
background image

Transmission / Receiving protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate

with all sets regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’

Acknowledgement

[Command2][ ][Set ID][ ][OK/NG][Data][x]

* When the product receives data normally, it sends an acknowledgement (ACK) in the format above.

If data is in read mode, it indicates the data that shows the current status. If data is in read mode, it

simply indicates the data that is sent from the computer.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all display and they do send an

acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can

be checked (only for some functions).
* Some commands are not supported depending on the model.

01. Power (Command: k a)

To control the Power On/Off the display.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
00 : Power off
01 : Power on
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the display is fully powered on, the Acknowledgement signal is returned properly. *

There may be a certain time of delay between the Transmission and Acknowledgement signals.

Transmission / Receiving protocol 79

Advertising