AEG 86720 - Příručka (Stránka 16)

Operating instructions
16
Detergent and conditioner
Which detergent and conditioner?
Use only detergents and conditioners which are suitable for use in
washing machines. Always observe the manufacturer’s instructions.
How much detergent and conditioner?
The required quantity depends upon:
• the amount of washing
2 If the detergent manufacturer does not include dosing instructions for
reduced loads, use one third less for half loads and only half of the full
load detergent quantity for very small loads.
• extent of soiling of the washing
• hardness of tap water
Observe instructions for use and dosing provided by the detergent and
conditioner manufacturer.
Use of water softener
A water softener should be used for mid to high water hardness (as of
water hardness level II). Observe manufacturer’s instructions! Always
dose detergent for water hardness level I (= soft). Your local water
works can provide you with information concerning water hardness.
2 Due to the fact that the water softener is added before the primary
detergent (pre-softening of water), only eighty percent of the quantity
of water softener indicated on the package is required.
Information on water hardness
Water Hardness
Water hardness in °dH
(German hardness scale)
Water hardness in mmol/l
(millimol per litre)
I – soft 0 – 7 to 1.3
II – middle-hard 7 – 14 1.3 – 2.5
III – hard 14 – 21 2.5 – 3.8
IV – very hard greater than 21 greater than 3.8