Setting end of cooking time / delayed start, Indication of the residual heat inside the oven, Timer – Whirlpool AKZM 662-IX Uživatelská příručka

Stránka 13: Gb10

Advertising
background image

GB10

SETTING END OF COOKING TIME / DELAYED START

The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and
59 minutes. This can only be done once cooking time has been set. This setting is only possible when
pre-heating is not required for the selected function.

After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end
of cooking time, and thus also the cooking start time, proceed as follows:
1.

Turn the “Browse” knob to position the cursor at the end of cooking time.

2.

Press button to select the setting: the end of cooking time flashes.

3.

To delay the end of cooking time, turn the “Browse” knob to set the desired value.

4.

Confirm the selected value by pressing button .

5.

Turn the “Browse” knob to position the cursor at START and then press .

6.

The display indicates which shelf food should be placed on. Do as instructed and press to start
cooking. The oven will start cooking after a period of time calculated so as to finish cooking at the set
time (for example, in the case of a dish which requires a cooking time of 20 minutes, if the end of
cooking time is set to 20:10, the oven will begin cooking at 19:50).

N.B.: during the interval before cooking starts, the oven can in any case be switched on by turning
the “Browse” knob to position the cursor at “Start” and then pressing .
At any time, set values (temperature, grill setting, cooking time) can be changed as described in
previous paragraphs.

INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN

If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the
display shows the current temperature and the bar indicating cooling in progress. When the residual heat
reaches 50°C, the display shows the current time.

TIMER

This function can be used only with the oven switched off and is useful, for example, for monitoring the
cooking time of pasta. The maximum time which can be set is 1 hour 30 minutes.
1.

With the oven switched off, press button : the display will show “00:00:00”.

2.

Turn the “Browse” knob to select the desired time.

3.

Press button to start the countdown. When the set time has elapsed, the display will show
“00:00:00” and an acoustic signal will sound. At this point the time can be prolonged, proceeding as
described above, or the timer can be deactivated by pressing button (the time of day will be shown
on the display).

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

19:20

- 00:30

Start

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

19:20

- 00:30

Start

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

20:10

- 00:30

Start

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

20:10

- 00:30

Start

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

20:10

- 00:29

Start

PREHEAT

No

TEMPERATURE

180°C

COOK TIME

END TIME

Conventional

20:10

- 00:30

Start

Residual Heat

168°

19:42

Turn +/- to set Timer, ✓ to Start

00 : 00 : 00

(HH) (MM) (SS)

Turn +/- to set Timer, ✓ to Start

00 : 30 : 00

(HH) (MM) (SS)

Timer

01 : 09 : 00

Advertising