Printing (hp-ux), Printing from hp-ux – Dell 5130cdn Color Laser Printer Uživatelská příručka
Stránka 277
jobownername::
:password:
::
For jobownername, enter a job owner name up to 32 characters.
For password, enter an alphanumeric password between 4 and 12 characters.
For jobgroupname, specify a job group name up to 32 characters.
NOTE:
Alphanumeric characters, including spaces and colons, and symbols can be entered to specify a job owner
name.
NOTE:
When no job owner name is specified, login user name is used as job owner name.
NOTE:
When a job owner name exceeds allowable character length, the extra characters are ignored.
NOTE:
When an unacceptable character is entered to specify a job owner name, "UnknownUser" becomes the job
owner name.
NOTE:
When an unacceptable character is entered in a password, or when a specified password is not within the range
of the allowable character length, the authentication password is treated as not specified.
NOTE:
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Printing (HP-UX)
This section provides information on printing from the registered logical printer during the installation.
Printing From HP-UX
To print to the default printer:
If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in
the following example.
% lp filename
To print to other printers:
To print to a printer named dell5130cdn, type as follows.
% lp -d dell5130cdn filename
To change the default printer temporarily for printing:
To change the default printer, set the printer name in the environment variable PRINTER.
To set a printer named dell5130cdn as the default printer for printing, type as follows.
% setenv PRINTER dell5130cdn
% lp filename
To print with added options:
To print with the options, specify the option of the lp command using -o as follows.
The available options are the same as txt2ps2/tiff2ps/xwd2ps2.
Depending on installed options, the available paper trays are different.
%lp -d dell5130cdn -o r -o ILT filename