Panasonic TX28LB1PS - Příručka (Stránka 21)

QUICK START
Check you have all the
components shown here:
remote control
unit batteries
2 X R6 (UM3)
AV cover
TKP0E11201
or
TKP0E11202
EUR511310
remote control
unit
operation
manual
Remote control unit batteries
Insert the batteries ensuring
correct polarity.
Do not use old and new
batteries at the same time.
Used batteries should be
removed at once.
Do not mix battery types. Do
not use Ni-Cd, Ni-MH
batteries.
How To Start Up Quickly
Connect the aerial and the additional devices.
Switch on the unit and the connected devices.
Select your language.
Press TV/AV button.
Select your country.
Press TV/AV button.
TV/AV
TV/AV
Automatic tuning will turn on, your
transmitting stations will be found, saved
in memory, and organised.
Press button N if you want
to cancel the ATP sequence.
If the AV connector is connected to a
compatible VCR the programmed data
will be transmitted to the VCR via
Q-Link. See page 31.
Channel selection Volume adjustment
• If the VCR has failed to receive the data transmitted from the television
unit you will probably have to find a way to transmit the data from the VCR
menu.
• If Q-Link does not work properly, check if the SCART cable is
connected to AV1 connector on the unit and has all the 21 pins, and if the
VCR is compatible with Q-Link, NEXTVIEWLINK and similar techniques.
• You will find Information regarding Q-Link and connection on pages
31 and 35. Should you need more detailed information, contact your
dealer.
If you install a new Q-Link compatible VCR, you may switch it on. The
transmitted tuning data will match the data in the unit. If you use a new
NEXTVIEWLINK-compatible VCR, the data will have to be transmitted
manually. See details in the VCR operating manual.
21