Q-link, Av selection - av mode, Aw selection - av mode – Panasonic TX21CK1P Uživatelská příručka
Stránka 32
Pozor! Text v tomto dokumentu byl rozpoznán automaticky. Chcete li prohlédnout původní dokument - stiskněte tlačítko "Původní režim".
Q-LINK
By selecting the
Q-Link
function the TV setup data may be downloaded from the television to the
VCR memory.
Press button “F”.
Select Setup menu.
Enter Setup menu.
Select Tuning menu.
Enter Tuning menu.
Select Q-Link.
Activate Q-Link.
F
□
0 0
00
00
AV SELECTION - AV MODE
P
To select the AV mode press button ”AV/TV”. If another receiver is connected to the AV connectors (VCR, satellite
receiver, camera, etc. see page 35) and if it is in operation, its signal will be displayed and AV will appear in the top left
corner of the TV screen regardless of the selected programme position. (TV tuner is ignored).
P This television may automatically switch over to the AV mode if the connected device sends a switch signal to the
SCART cable connector. The picture received will remain the same when the TV programme is changed.
P
You may switch back to the television by pressing button “AV/TV” or by disconnecting the AV device.
P
Two AV devices may not be connected to the television simultaneously, as their signals would overlap.
P If an NTSC signal is connected via the AV input the television will automatically detect the signal and switch over to
the NTSC standard. The Main Menu OSD indications will be enhanced in the AV mode as another selection is
added: Tint, which may be adjusted with buttons “+” and “-”.
32