Philco PMD 2303 - Příručka (Stránka 7)

EN - 5
01/2012 Copyright © 2012, Fast ČR, a. s.
PART 2: DESCRIPTION OF DEVICE
1. 2. 3. 4. 5.
6.
7. 8. 9. 10. 11.
1. Safety door closing system – if the door is closed then the appliance will turn off automatically. If you
open the door while the appliance is running, the appliance will turn off automatically, including the
magnetron.
2. Door seal – the door seal prevents microwaves from being emitted outside of the internal area of the
oven.
3. Internal area of the oven
4. Lighting – The light will automatically turn on when the oven is running.
5. Safety door closing system
6. Control
panel
7. Waveguide cover – protects against soiling when food is heated.
8. Rotating ring – must always be installed under the glass plate if you wish to use the oven.
9. Coupler - it is located on the shaft mounted in the centre of the bottom part of the internal area of the
oven and transfers the motion from the plate drive to the rotating plate. For this reason the coupler
remains permanently in the oven irrespective of its operating mode.
10. Rotating glass plate – made from special fi re-resistant glass. Always ensure that the plate is correctly
seated in the oven before operating it. Do not use the oven without the glass plate inserted.
11. Microwave oven window – makes it possible to check progress during cooking. The window is equipped
with a shield through which light can pass, but microwaves are blocked.