Philco PMD 2525 B - Příručka (Stránka 14)

EN - 12
01/2015 Copyright © 2015, Fast ČR, a. s.
PA R T 5 : O P E R AT I N G I N S T R U C T I O N S F O R T H E
M I C R OWAV E OV E N
Operation Instructions
1. Clock Setting
When the microwave oven is electrifi ed, the LED will display “0:00”, buzzer will ring once.
1) Press “ ” once to select clock function, the hour fi gures will fl ash.
2) Turn “ ” to adjust the hour fi gures, the input time should be within 0–23.
3) Press “ ”, the minute fi gures will fl ash.
4) Turn “ ” to adjust the minute fi gures, the input time should be within 0–59.
5) Press “ ” to fi nish clock setting. “:” will fl ash, and the time will light.
NOTE:
1) The clock will not work if it is not set when powered.
2) During the process of clock setting, if you press “
”, the oven will go back to the previous
status automatically.
2. Microwave Cooking
Press “ ” the LED will display “P100”. Press “ ” for times or turn “ ” to choose
the power you want, and “P100”, “P80” “P50”, “P30 “P10” will display for each added press. Then press
“ ” to confi rm, and turn “ ” to set cooking time from 0:05 to 95:00. Press “
” again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the oven as the
following steps.
1) Press “ ” once, the screen display “P100”.
2) Press “ ” once again or turn “ ” to choose 80% microwave power.
3) Press “ ” to confi rm, and the screen displays “P 80”.
4) Turn “ ” to adjust the cooking time until the oven displays “20:00”.
5) Press “ ” to start cooking.
NOTE:
The step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes