Philco PEB 644 IX - Příručka (Stránka 10)

EN - 8
04/2012 Copyright © 2012, Fast ČR, a. s.
1. Place the exhaust fl ange on to the range hood. This part is not included, it must be purchased separately.
2. Attach one end of the aluminium fl ue pipe to the range hood fl ange and the other end to the air outlet.
Check that both ends are fi rmly attached and secured in place.
3. Bends and deviations in the aluminium fl ue pipe reduce the exhaust performance, so it is essential that the
pipe is bent as little as possible.
Right Wrong
Carbon fi lter
If you are using the range hood without an air exhaust, it is necessary to use a carbon fi lter. The carbon fi lter is
not included. Contact your vendor or an authorised service centre to purchase this fi lter.
 Before installing or replacing the carbon fi lter, check that the appliance is turned off and disconnected
from the power socket or that the respective circuit breaker is turned off .
 It is necessary to replace the carbon fi lter regularly every 3 – 5 months depending on how much the
appliance is used.
 Never wash the carbon fi lter in water unless the manufacturer states otherwise.
 Fat fi lters must always be installed even when the carbon fi lter is not installed. Do not use the appliance
without the fat fi lter inserted.