Philco PEB 644 IX - Příručka (Stránka 9)

EN - 7
04/2012 Copyright © 2012, Fast ČR, a. s.
 Select an even surface for the necessary assembly of the range hood. Cover the surface with a protective
material and place all parts of the range hood and fastening elements on to it.
 It is necessary that a qualifi ed technician inspects the suitability of the supplied fastening material and
other components for the specifi c wall / ceiling type. The wall / ceiling must be suffi ciently strong to hold
the weight of the range hood.
 Do not attach this range hood to a wall or cabinet furniture by tiling, plastering and do not glue it on using
silicone glue. The appliance is designed to only be installed on a wall / ceiling.
 We recommend that always two people perform the installation of the appliance.
If your range hood is designed to be mounted to the ceiling, adhere to the following instructions.
1) The range hood must only be suspended on ceiling beams or on load bearing ceiling beam connections.
2) Do not suspend the range hood on false ceilings.
3) The ceiling must have a load bearing capacity of at least 40 kg.
4) The ceiling thickness must be at least 30 mm.
IMPORTANT:
THE RANGE HOOD MAY ONLY BE CONNECTED TO THE ELECTRICAL GRID AFTER THE ENTIRE INSTALLATION
IS COMPLETE.
Drill 4 holes into the bottom wooden shelf according to the pattern on the top plate of the range hood.
Also cut out a hole for the exhaust with a diameter of 130 mm.
Use the provided screws (3.5 x 45) to mount the range hood into the cabinet. Check that the extensible part is
not preventing the cabinet doors from opening / closing.
Exhaust connection
NOTE:
This range hood may be used with or without an exhaust. Nonetheless it is recommended to install it with
the exhaust option.
The carbon fi lter is not included.
WARNING!
The air outlet must not be connected to the chimney of a fi re stove or another similar outlet used
for heating.