Philco PEW 6712 - Příručka (Stránka 13)

EN - 11
04/2012 Copyright © 2012, Fast ČR, a. s.
11) Removing the separation plate
Hold the plate in the top right and top left corners and pull out the plate.
After completing the installation check that the range hood is correctly installed and works properly.
Carbon fi lter
If you are using the range hood without an air exhaust, it is necessary to use a carbon fi lter. The carbon fi lter is
not included. Contact your vendor or an authorised service centre to purchase this fi lter.
 Before installing or replacing the carbon fi lter, check that the appliance is turned off and disconnected
from the power socket or that the respective circuit breaker is turned off .
 It is necessary to replace the carbon fi lter regularly every 3 – 5 months depending on how much the
appliance is used.
 Never wash the carbon fi lter in water unless the manufacturer states otherwise.
 Aluminium fi lters must always be installed even when the carbon fi lter is not installed. Do not use the
appliance without the aluminium fi lter installed.
Replacing the carbon fi lter
1. For the correct operation of the appliance it is necessary to install a carbon fi lter. The number and type
depends on the model.
2. Place the carbon fi lter on the motor outlets and turn it in the clockwise direction.
3. To remove the carbon fi lter turn it in the anticlockwise direction.
or