Philco PEW 6712 - Příručka (Stránka 4)

EN - 2
04/2012 Copyright © 2012, Fast ČR, a. s.
PART 1: IMPORTANT SAFETY INSTRUCTIONS
Recommendation:
Carefully read these instructions before installing and operating this range hood.
Write down the serial number found on the rating label of the range hood in the space below. It is essential that
you store this user's manual in a safe place so that you can use it in the future. If you intend to sell the appliance,
give it to another owner, or if you move, always make sure that the user's manual is attached to the appliance,
so that the new owner can also learn about the operation of the appliance and the relevant warnings.
SERIAL NUMBER:
Important safety instructions
 This appliance is designed for household use only.
 Before connecting the power cord plug, make sure the voltage stated on the rating label of the appliance
corresponds to the voltage in your wall socket. Connect the power cord plug to a power socket with
a voltage of 220 – 240 V ~ 50 Hz.
 Only use a properly grounded power socket. The appliance may only be connected to a properly grounded
power socket.
 All electrical connections must be performed by a qualifi ed electrician.
 Installation performed by an unqualifi ed person may cause incorrect operation, damage to the appliance,
create a fi re hazard or cause injury to persons.
 Neither the manufacturer nor the vendor take responsibility for damages cause by incorrect or
unprofessional installation, connection or operation. Tampering with the appliance by an unqualifi ed
person will void the customer's right to a warranty repair.
 Do not expose the power cord to excessive pressure or loads, do not place heavy objects on it, it must
not be tangled and it must not be stepped on. Do not locate the power cord in or on heat sources such
as stoves, heating or other generators of heat. Otherwise this may damage the power cord or create a fi re
hazard.
 Only connect the power cord plug to a power socket after the entire installation is completed.
 The power plug serves as a disconnection device and for this reason the power socket must remain easily
accessible for the event of a dangerous situation, unless it is connected into a terminal box.
 Do not touch the lights if the appliance has been running for some time. Lights heat up during operation
and may cause burns.
 This appliance is designed for fume extraction during standard domestic use. Do not use the appliance
for purposes other than those for which it was designed. Otherwise you expose yourself to the risk of
a dangerous situation and voiding the warranty.
 Follow the instructions for installation and ventilation (with the exception of when a fi re stove is used).
 Do not use the fl ambé cooking method under the range hood.
 Regularly replace the fi lters in the range hood. Otherwise this presents a fi re hazard.
 Only use fi lters suitable for use with the range hood. The manufacturer or distributor will recommend the
suitable fi lter type.
 Do not use the appliance without the aluminium fi lter inserted. Do not take out the fi lters while the
appliance is on.
 Regularly clean the appliance to prevent a dangerous situation from occurring.
 Before cleaning, replacing fi lters, moving or any other maintenance, turn off the appliance and pull out the
power plug from the power socket, or turn off the respective circuit breaker.
 If you are using another gas or natural gas appliance in the room at the same time, the fumes from this
appliance must be spatially isolated.