Philco PW 12 - Příručka (Stránka 4)

EN - 2
01/2012 Copyright © 2012, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Safety precautions
Symbols:
General advice for the optimal operation of the appliance
General dangers
Hot surfaces
Before you put the appliance into operation
Important
This appliance is designed exclusively for storing bottles of wine. Do not use the appliance for purposes
other than those for which it was designed.
• Carefully study the user's manual and installation instructions before installing and using the appliance!
This user's manual includes important information regarding the installation, operation and maintenance
of the appliance. Store the user's manual also for future reference, or for other owners of the appliance if
the appliance is sold.
If the appliance is transported in a horizontal position the oil from the compressor may leak into the
cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before
turning it on, so that the oil can fl ow back into the compressor.
After unpacking the appliance, carefully inspect that it has in not been damaged in any way. Also
check that the power cord is not damaged. If you discover any defects, turn off the appliance
and contact the vendor or in the case of a damaged power cord contact the service centre. If the
appliance and all its parts are in order, install it according to the instructions in the relevant chapter.
• When installing the appliance in its place or when moving the appliance, the power cord could be
penetrated or damaged. Check that the power cord is not interfering anywhere.
• Before connecting the appliance to the electricity power source check that the capacity of the system
corresponds to the specifi cations on the appliance's rating label.
• Any kind of home electric wiring necessary for the connection of the appliance must only be carried out
by a qualifi ed electrician.
If you move the appliance from its usual position, it is necessary to understand, that although you
have disconnected the power cord, the components on the rear side of the appliance may remain
very hot for some time.
Do not cover or block the air infl ow or outfl ow openings. Insuffi cient ventilation will cause poor
operation and damage to the appliance.