LG VR62601LVM - Příručka (Stránka 20)

18
HOW TO CHARGE THE BATTERY
Check 1:
If the battery is not charging even when the Robot Cleaner is
attached to the home station, check the following items.
- Turn the power switch on the rear-left of the Robot Cleaner
off once and then on again.
- Check the power lamp of the home station.
- Wipe the terminal on the home station with a dry cloth. (p32)
Battery level is indicated on Status Display, as follows.
• If recharging is in progress, the Battery Level Lamp fl ickers.
• If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.
• Upon the need for recharging, only the fi rst level of Battery Level Lamp will be on and fl ickering.
The status indication lamp
while the robot is charged
(In spatial Zigzag mode)
※ If Robot Cleaner goes back to Home Station, with a low level of battery
while it is the 'Clean Mode' lamp starts to fl icker.
- When the 'Clean Mode' lamp starts to fl icker after recharging is
complete, Robot Cleaner will then resume cleaning the areas which
were not covered.
- Pressing the 'Start' button on the Remote Controller or 'Stop' button on
main unit whilst it is recharging, with the 'Clean Mode' lamp fl ickering,
will also make Robot Cleaner fi nd and clean uncovered spots.
- Pressing the "Start" button on the remote control or the "Start/Stop"
button on the device after changing the mode will make the Robot
Cleaner start to clean from beginning again.
Remaining Battery Charge Indicator
If the Battery is Not Charging
Flickering Flickering
In the case of no existing
area to be cleaned
In the case of an existing area
to be cleaned (Flickering)
Power lamp
Charge terminal
Charging is required
Middle
Low
High