LG VR5942L - Příručka (Stránka 16)

14
HOW TO TURN THE POWER SUPPLY ON AND OFF.
To turn the power supply on, turn the HOM-BOT upside down
on a smooth/soft surface and check whether the main power
supply switch is turned on.
If the main power supply switch is turned off, turn on the
switch.
※ When turning on the power switch, do not press the button
located at the upper section of the HOM-BOT. Operation of
the button can be delayed.
※ Turn off the power switch if the HOM-BOT will not be used
for a long period of time, in order to protect the battery.
※ The power switch cover is used for protecting the switch
from the dust. Always keep the cover attached on.
When HOM-BOT is not turned on, press the ‘START/
STOP’ button for more than 1 second. The power supply
will be turned on with the melody sound.
※ If the power supply is turned on and nothing is done for
ten minutes, the power supply will automatically turn off
to reduce battery consumption.
Press the START/STOP button for two seconds while the
HOM-BOT is turned on. A melody will sound when the
power is turned off. The power will be turned off with the
melody sound.
Turning on the main power supply
Turning on the power supply
Turning off the power supply
ţ

The power can be turned off due to the static electricity during
the operation.
- If the power is turned off, turn off the main power switch and
then turn it back on.
ţ

*G
UIF
Qower cannot be turned on, do the following.
- Turn on the power switch and wait for more than 3 seconds.
- Press the ‘START/STOP’ button when the power switch is
turned on.
- If the power is not turned on or if there is no display but only
the “Ting” sound, put the HOM-BOT on the home station.
- If there is no change even when HOM-BOT is attached to the
home station, press the reset switch located on the rear side
of the home station while the HOM-BOT is attached on the
home station.
Tip