LG VR5942L - Příručka (Stránka 17)

15
After the HOM-BOT is turned on, press the START/STOP button to
begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
※ When the ‘START/STOP’ button is pressed while the power supply
of the HOM-BOT is turned off, the power will be turned on. Press the
‘START/STOP’ button one more time to clean.
After the HOM-BOT is turned on, press the START button on the re-
mote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
※ The HOM-BOT power supply cannot be turned on by using the re-
mote control if the power of the HOM-BOT is off. When the power is
off, press the ‘START/STOP’ button on the upper side of HOM-BOT
to turn the power on.
※ When the START button on the main unit or remote control is pressed, HOM-BOT will start cleaning in
‘Spatial expansion’ mode.
※ During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.
When this happens, the internal impact detecting sensor will avoid the obstacles by using a backward mo -
tion.
※ If the HOM-BOT is set to start cleaning at a location away from the home station, put the device on a flat
floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a lo -
cation where there are not any obstacles such as curtains or walls within 30 cm (11.8 in) of the HOM-BOT.
Using the buttons on the HOM-BOT
Using the remote control
For best results:
ţ
Briefly scan the area to be cleaned for big and small objects that will cause difficulty if vacu-
umed up.
ţ
If cleaning is started when the HOM-BOT is at the home station, the device can rapidly be re-
turned to the home station as the current home position has been accurately read.
HOW TO START AND STOP CLEANING
Tip
ENGLISH