Philco PBC 6027 - Příručka (Stránka 13)

EN - 11
06/2012 Copyright © 2012, Fast ČR, a. s.
PART 5: REGULAR MAINTENANCE
Cleaning the appliance
Before commencing to clean the refrigerator disconnect it from the power source.
• Wipe the internal surface of the appliance with a soft sponge lightly dipped in a table salt solution. Add 2
tablespoons of table salt into 1 litre of warm water.
• Wash the racks in warm water with a small amount of kitchen dishwashing liquid, rinse and wipe dry. Allow
the wooden racks (if the wine cooler has them) to dry completely before returning them to the wine cooler.
• All parts that you wash with a soft sponge lightly dipped in water must be properly wiped dry.
• Wipe the outer surface with a soft sponge lightly dipped in water with a small amount of dishwashing
liquid. Wipe dry using a clean cloth.
WARNING:
Do not use steel wool or sponges with steel wool on stainless steel surfaces. They could damage the
surface.
Do not use cleaning waxes, concentrated cleaning agents, bleaches or cleaning products containing
kerosene on the plastic or rubber parts.
Never use paper towels or window cleaners on the plastic parts.
The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden.
Power outage
Most power outages are rectifi ed within a few hours and should not have an eff ect on the temperature inside
the appliance if you limit its ventilation. However, in the event of an extended power outage it is necessary to
take appropriate steps to prevent the contents inside the appliance from spoiling.
TAKING OUT OF OPERATION FOR AN EXTENDED PERIOD
If you are not going to use the refrigerator for an extended period of time, do the following:
Disconnect the refrigerator from the power source by pulling it out of the power socket. Clean out the inside
and dry it out as described in the part Cleaning the refrigerator. Leave the door open to prevent an unpleasant
odour forming inside.
Moving
• Before moving it, it is necessary to remove all contents from the appliance.
• Secure freely moving parts inside the appliance (racks), e.g. using adhesive tape.
• To prevent damage, screw in the levelling feet.
• Secure the door, e.g. using adhesive tape.
• Ensure that the appliance always remains in a vertical position while being transported. To prevent the
appliance from damage during transport you can cover it with a blanket or another soft textile.