Philco PHD 4313 S - Příručka (Stránka 8)

EN - 6
04/2014 Copyright © 2014, Fast ČR, a. s.
PART 3: OPERATING THE APPLIANCE
Before fi rst use
Before fi rst use, wipe the cooktop with a clean wiping cloth and wipe dry using a dry wiping cloth. Do not
use any cleaning agents, there is a risk of a fi ne blueish coat forming on the cooktop, which is very diffi
cult to
remove.
Touch controls
The hotplate is equipped with electronic controls with touch buttons. The respective function is activated
when a button is touched. This is accompanied by an indicator light, a letter or number on the display and
a sound is made.
Turning the appliance on and off
To turn on the appliance, press the button 0/I once. "0" will appear on the display.
To turn off the appliance, press the button 0/I once. The display will turn off and "H" will appear.
Turning a hotplate on and off
To set the power level using your fi ngers, slide across the power selection zone to the right to increase power
or to the left to decrease power.
"SLIDER"
To turn off the hotplate, slide your fi nger along the power selection zone until 0 or H appears on the display.
Likewise, you can set the power level of the hotplate by directly marking the location on the power selection
zone.
Direct
setting
NOTE:
You can set the timers in the same way as the hotplate power level settings.
If you do not press any button for 20 seconds, the hotplates will return to the stand-by mode.