Philco PHD 4313 S - Příručka (Stránka 9)

EN - 7
04/2014 Copyright © 2014, Fast ČR, a. s.
Detection of cookware
The detection of cookware function ensures the safe operation of the cooktop. The induction cooktop will not
function if:
-
there is no cookware on the hotplate or if the cookware is not suitable for use on an induction cooktop.
In such a case, it will not be possible to set a power level and the display will show "U". The symbol will
disappear when you place the correct type of cookware on the hotplate.
- remove the cookware from the hotplate, operation will be ended. The display will show "U". This symbol
will disappear when you place the cookware back on to the hotplate. The cooking process will continue at
the set power level.
After fi nishing cooking, turn off the hotplate. Do not allow the detection of cookware function to be activated
unnecessarily.
Residual heat indicator
The appliance is equipped with a residual heat function. If the temperature of the hotplate is higher than 50 °C
after it is turned off , the letter "H" will appear on the display, indicating the danger of a hot hotplate. Wait until
the indicator (letter H) turns off . Otherwise there exists a risk of burns or a fi re.
Booster function
The appliance is equipped with a Booster function [P].
This function shortens the cooking time by setting the maximum power level for 10 minutes. This function is
suitable for speeding up the heating of large amounts of liquids or sauces.
To set the Booster function, press the Booster button, the display will show the P symbol.
To turn off the Booster function, slide your fi nger along the power selection zone until 0 appears on the display
or press the "P" symbol.
NOTE:
The cooktop is equipped with the maximum power output. If the booster function is activated, in order
for the maximum power level not to be exceeded, the electronic system will automatically set the power
of another hotplate to a lower level. "9" will start fl ashing on the display within a few seconds and then
the maximum permitted power level from "6" to "8" will appear.
Timer functions
The timer makes it possible to set the time after which the hotplate will automatically turn off in the range
from 1 to 99 minutes.
Setting and adjusting the cooking time
Example: You wish to set 16 minutes at a power level of 7.
Select the respective hotplate, the display will show "00" and an indicator light of the selected hotplate will
turn on. Set the power level of the hotplate to 7. To select the timer, press CL on the display and the display
will show "00". To set the single digits, slide your fi nger along the power selection zone until 6 appears on the
display. "0" will remain still and "6" will fl ash. To confi rm the single digits, press "06" on the display.
To set the tens, slide your fi nger along the power selection zone until "1" appears on the display. "1" will fl ash
and "6" will remain still. To confi rm the tens, press "16" on the display.
The time is confi rmed and the countdown will be started.