Philco PEI 12715 - Příručka (Stránka 11)

EN - 9
04/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: INSTALLATION OF THE EXTERNAL MOTOR UNIT
PEM 14 External motor unit
1. Installation of hanging brackets
To hang the external motor unit it is necessary to fi rst install 2 L-shaped hanging brackets, which are
supplied together with the screws. Screw M5x40 screws into the M5 thread on the motor unit base.
2. Drilling mounting holes
Drill 8mm holes (A, B) in the installation location of the external motor unit and insert ø10mm dowels into
them.
3. Inserting screws
Into the holes with the dowels (A, B) screw in screws 5.5 x 60. Leave a gap of 5 mm between the screw
heads and the wall.
Install the non-return exhaust fl ap on to the top part of the motor unit using 3.5 x 9.5 screws.