Philco PEI 12715 - Příručka (Stránka 17)

EN - 15
04/2012 Copyright © 2012, Fast ČR, a. s.
PART 6: MAINTENANCE AND CLEANING
WARNING!
Before cleaning, regular or other maintenance, installation or removal, check that the appliance is
turned off and disconnected from the power socket or that the respective circuit breaker is turned
off .
Changing a light bulb
 Turn off the appliance.
 Take out the aluminium fi lter.
 If the light bulb broke during operation wait until it cools down.
 To remove the halogen light bulb (50 W), press the light bulb holder downwards and gently turn
it anticlockwise. Remove the light bulb.
 Install a light bulb with the same parameters in reverse sequence.
Cleaning
 Aluminium fi lters capture dust and fat from the extracted air.
 It is necessary to regularly wash these fi lters, ideally once a month, depending on the level of use. Wash the
fi lters in water with dishwashing detergent, or you may place the fi lters in a dishwasher and wash them
using a gentle program (max. 60°C).
 Take out the aluminium fi lters by pressing the clip.
 After cleaning allow the aluminium fi lters to dry thoroughly before reinstalling them.
 Wipe the outer surface of the range hood with a clean damp wiping cloth lightly dipped in water with
a small amount of dishwashing detergent. Then wipe dry.
 Avoid electrical parts coming into contact with water or another liquid.