Philco PEI 12715 - Příručka (Stránka 13)

EN - 11
04/2012 Copyright © 2012, Fast ČR, a. s.
Cable connection
After completing the entire installation and connecting the tubes you can connect the cables of the external
motor unit to the range hood. Connect the cables according to the pictures below.
Cable of the
range hood Cable of the external
motor unit
PEM 8 External motor unit
1. Installation of hanging brackets
To hang the external motor unit it is necessary to fi rst install 2 L-shaped hanging brackets, which are
supplied together with the screws. Screw M5x40 screws into the M5 thread on the motor unit base.
2. Drilling mounting holes
Drill 8mm holes (A, B) in the installation location of the external motor unit and insert ø10mm dowels into
them.
3. Inserting screws
Into the holes with the dowels (A, B) screw in screws 5.5 x 60. Leave a gap of 5 mm between the screw
heads and the wall.